STANDARD™ Tint PR Colors

Developed for Water-Based Flexographic and Gravure Printing

STANDARD™ Tint PR colors are high-strength, high-quality aqueous pigment dispersions in water-borne acrylic resin.

STANDARD™ Tint PR colors contain no surfactants that can often interfere with printing ink performance and durability. In laboratory tests STANDARD™ Tint PR colors have been shown to produce prints with high gloss, optimum rheology and extended stability.

In addition to their applications in the ink industry, STANDARD™ Tint PR products are often used in the coloring of rubber latex, coatings, textile printing and paper coating.

Masstone Shade 1/20 Tint Tone STANDARD™
Tint PR Colors
CI
No.
%
Pigment
Bleed Resistance Heat Fastness Light Fastness
Acid Alkali Water Ethanol Glycol Paraffin Wax Soap 15min/
150°C
30min/
150°C
MT TT
STANDARD™ Tint PR Yellow 1003 PY 3 30% 4-5 4-5 4-5 2-3 2-3 3 3 4-5 3-4 7 5
STANDARD™ Tint PR Yellow 1012 PY 12 32% 5 4-5 5 4-5 2-3 2 4-5 4-5 3-4 4-5 3-4
STANDARD™ Tint PR Yellow 1014 PY 14 37% 4-5 4-5 5 4 5 5 5 4-5 4-5 4-5 3-4
STANDARD™ Tint PR Yellow 1074 PY 74 37% 4 4 5 2 4 1-2 3-4 4 1-2 7-8 7
STANDARD™ Tint PR Yellow 1065 PY 65 40% 5 5 3 4 3 5 5 4 3 7-8 5-6
STANDARD™ Tint PR Yellow 1083 PY 83 37% 4 4 5 5 5 5 4-5 5 5 7 5-6
STANDARD™ Tint PR Yellow 1042 PY 42 57% 4 5 5 5 5 5 5 4 4 8 8
STANDARD™ Tint PR Orange 2005 PO 5 36% 4-5 4-5 4 2 2-3 2 4-5 4-5 4 5-6 3
STANDARD™ Tint PR Orange 2130 PO 13 35% 5 5 5 3-4 3-4 3-4 3-4 5 5 5 3
STANDARD™ Tint PR Orange 2016 PO 16 35% 5 5 5 5 5 4-5 4-5 2 2 3-4 3
STANDARD™ Tint PR Orange 2046 PO 46 38% 4 4 3 2-3 2 3 1-2 3-4 3 4-5 2
STANDARD™ Tint PR Red 3481 PR 48:1 35% 5 3-4 5 5 2-3 5 2 3-4 2-3 5 4
STANDARD™ Tint PR Red 3482 PR 48:2 36% 4 2-3 5 4 3-4 5 1 3-4 2-3 5 4
STANDARD™ Tint PR Red 3531 PR 53:1 33% 3-4 2-3 5 4 1 5 1 3 3 3-4 2
STANDARD™ Tint PR Red 3491 PR 49:1 35% 4 2-3 5 2 1 5 1 3 2-3 3-4 3
STANDARD™ Tint PR Red 3492 PR 49:2 35% 4 2-3 5 2 1 5 1 3 2-3 3-4 3
STANDARD™ Tint PR Red 3571 PR 57:1 35% 3 3-4 5 4 2 5 1 5 3 5 3
STANDARD™ Tint PR Red 3813 PR 81:3 35% 3-4 2-3 3-4 2-3 2-3 5 2 3 2-3 3 2
STANDARD™ Tint PR Red 3002 PR 2 33% 5 5 5 2-3 2-3 2 5 5 3 5 3-4
STANDARD™ Tint PR Red  3922 PR 22 35% 5 5 5 4 2 2-3 3-4 5 3 5 2-3
STANDARD™ Tint PR Red 3123 PR 23 35% 5 5 5 4 3 4 4 5 3 5 2-3
STANDARD™ Tint PR Red 3170 PR 170 40% 5 5 5 4 4 4 5 5 5 7 6
STANDARD™ Tint PR Red 3184 PR 184 32% 5 5 5 4 4 4 5 5 5 7 6
STANDARD™ Tint PR Red 3188 PR 188 38% 5 5 5 4 4 4 5 5 5 7 6
STANDARD™ Tint PR Red 122 PR 122 35% 5 5 5 5 5 5 5 5 5 8 8
STANDARD™ Tint PR Red 3101 PR 101 35% 5 5 5 5 5 5 5 5 5 8 8
STANDARD™ Tint PR Violet 4019 PV 19 35% 5 5 5 5 5 5 5 5 5 8 8
STANDARD™ Tint PR Red 3169 PR 169 35% 3-4 3-4 3 3 1 5 1 3-4 2 3 2
STANDARD™ Tint PR Red 3266 PR 266 35% 5 5 5 5 4 4 5 5 5 6 6
STANDARD™ Tint PR Red 3268 PR 268 35% 5 5 5 5 4 4 5 5 5 6 6
STANDARD™ Tint PR Red 3269 PR 269 35% 5 5 5 5 4 4 5 5 5 6 6
STANDARD™ Tint PR Red 3254 PR 254 35% 5 5 5 5 5 5 5 5 5 8 8
STANDARD™ Tint PR Violet 4003 PV 3 35% 3 4 4 1 1 4 1 3 4 3 2
STANDARD™ Tint PR Violet 4023 PV 23 40% 5 5 5 4 5 5 5 4 4 8 7
STANDARD™ Tint PR Violet 4027 PV 27 32% 2-3 2-3 4 1 1 5 1 3 3 3 2-3
STANDARD™ Tint PR Blue 5150 PB 15:0 32% 5 5 5 5 5 5 5 5 5 8 8
STANDARD™ Tint PR Blue 5153 PB 15:3 39% 5 5 5 5 5 5 5 5 5 8 8
STANDARD™ Tint PR Blue 5061 PB 61 32% 5 2 5 2 2 5 2 5 3 3 3
STANDARD™ Tint PR Blue 5016 PB 16 34% 5 5 5 5 5 5 5 5 5 8 8
STANDARD™ Tint PR Blue 5079 PB 79 36% 5 5 5 5 5 5 5 5 5 8 8
STANDARD™ Tint PR Green 5007 PG 7 43% 5 5 5 5 5 5 5 5 5 8 8
STANDARD™ Tint PR White 9006 PW 6 67% 5 5 5 5 5 5 5 5 5 8 8
STANDARD™ Tint PR Black 8007 PBK 7 35% 5 5 5 5 5 5 5 5 5 8 8

Procedures:

Dyeing at 140º

Pre-scour with 1& STANSCOUR® BRC at 160º for 20-minutes.

  1. Drop & rinse.
  2. Set bath at 90ºF with:
    1. Xg/l salt (per chart below)
  3. Add PERMARBIL® Reactive Dye (pre-dissolve in 160º-180ºF water).
  4. Run 10-minutes.
  5. Add 1/10 total amount of Soda Ash over 10-minutes.
    1. Run 10-minutes.
  6. Add remaining 9/10 Soda Ash over 10-minutes (pH 10.8-11.2).
    1. Run 10-minutes.
  7. Heat to 140ºF at 2ºF/minute.
    1. Run for 45-minutes.
  8. Sample.
    1. If shade is acceptable, drop bath.
    2. When sampling shade, swatch should be: rinsed cold, rinsed warm, and neutralized with 0.25% Acetic Acid. Then, scoured at 200ºF – see steps 12-18.
  9. Rinse at 120ºF for 10-minutes.
    1. Drop bath.
  10. Rinse at 140º for 10-minutes.
    1. Drop bath.
  11. Neutralize at 120ºF with 0.25% Acetic Acid (pH 7-8).
    1. Run 10-minutes.
    2. Drop bath.
  12. Set fresh bath to 120ºF.
  13. Heat to 200ºF.
    1. Hold 10-minutes.
    2. Drop bath.
  14. Set bath to 120ºF.
    1. Hold 10-minutes.
    2. Drop bath.
  15. Finish as usual.

Salt and Soda Ash Recommendations for Cotton/Rayon

% Reactive Dye

g/l Sodium Chloride or Sodium Sulfate

g/l Soda Ash

0-0.25

30

5

0.26-0.50

50

5

0.51-1.00

60

10

1.01-2.00

60

10

2.01-3.00

80

10

3.01-5.00

80

10

Above 5.00*

*When dyeing above 5.00% the yield should increase with use of 100g/l salt

80-100

10

PERMABRIL® Brill Blue R Special Requires Reduced Salt

% Reactive Dye

g/l Sodium Chloride or Sodium Sulfate

up to 0.50

20

0.51-2.00

30

2.01-4.00

40

Above 4.00

50

Skip to content